Kuhn EXCELERATOR 8005-20

Double tap to zoom

 

Features

Exclusive 4-Step Process

1.Capture and Slice: Excalibur® VT (Vertical Tillage) blades, with their distinctive scalloped edge, capture and slice residue into planter-manageable sizes. This exclusive, 32-flute design easily penetrates soil, creates small clod size and begins the soil and residue mixing process.
2.Cut and Remove: In this high-speed process, adjustable gang angles with Excalibur VT blades (on 8” spacing), remove the maximum amount of uncut soil at shallow depth settings, while minimizing furrowing and ridging for a smooth field finish. The adjustable gang angle gives you the choice to move soil laterally or to leave more residue.
3.Mix and Anchor: Exclusive to KUHN Krause, rotary Star Wheel™ treaders aggressively mix soil and residue, pulverize large clods, remove soil from disturbed root balls and anchor residue into the soil surface.
4.Size and Firm: The proven 24/7® soil conditioning reel delivers clod sizing and firming for this high-speed operation.

Manage Residue

Adjustable Gang Angles
Soil movement and residue mixing are varied by adjusting the gangs from 1° (maximum residue retention) to 5° (maximum soil movement, leveling and residue mixing). Hydraulic gang angle adjustment is available as an option. Excalibur VT blades are designed to wear on both sides of the blade at these settings, maintaining a sharp edge over time. These shallow angles prevent soil roll and inversion, distinguishing the Excelerator’s performance from competitive units based on older disc harrow technology with typical gang angles from 10° to 22°.

Excalibur® VT Blade Spacing
The second gang of Excalibur VT blades are indexed to the front 8” spaced blades to remove the maximum amount of uncut soil at shallow depth settings. This provides uniform tillage without smearing or compacting the critical seed zone required for consistent seedling root development. During this process, soil and residue are lifted above the surface and propelled by the fluted blades into the next step of this exceptional vertical tillage process. The unique design of the Excalibur VT blades minimizes furrowing and ridging, leaving a smooth field pass-to-pass.

Quality Finishing

Exclusive Star Wheel™ Treaders
Aggressively mix soil and residue, pulverize large clods, level and anchor residue into the soil surface. This action protects residue from blowing winds or washing rains, and begins the decomposition of residue into valuable organic matter.

The Star Wheel treaders assist in breaking out any remaining uncut soil between blade paths providing a smooth, even surface for planter row units to place seeds consistently in the seed zone. Constant flow hydraulic-adjustable gangs are spring cushioned to contour over varying field conditions, evenly distributing residue across the soil surface for a uniform finish.

Heavy-Duty 24/7® Conditioning Reel
The proven 24/7 soil conditioning reel delivers clod sizing and firming for this high-speed operation. The 24/7 reel also offers the convenience of “floating” with a simple in-field adjustment, allowing continued operation in higher soil moisture conditions. Two heavy-duty reel options are available. Choose flat blades for maximum clod sizing in hard soil conditions or round bars for increased soil firming in loamy soil conditions, this effective component completes a superior finish to any field.

Specifications

Model 8005-20
Transport Height (ft/m) 10'9" / 3.2
Transport Width (ft/m) 12'2" / 3.7
Blade Spacing (in/cm) 8" / 20.3
Number of Blades 65
Working Width (ft/m) 20' / 6.1
Gang Angle Hydraulic Adjustment 1 to 5 Degrees
Approximate Weight (lbs/kg) 17,000 / 7 711
STANDARD EQUIPMENT  
Hitch Type Articulating Ball, CAT IV- 2" Pin
Tongue Type Mechanical Fore / Aft Adjustment, Level - Lift Tongue
Hydraulics Single Point Depth Control, Cylinders with Royal Plate Plus®, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses
Transport Locks and Safety Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting
Excalibur® Blades Excalibur® Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center
Gangs 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench
Gang Angle Adjustment Mechanical Adjustment 1 to 5 Degrees
Gauge Wheels None
Main Frame Tires Walking Beams With Spherical Pivot Bearings, Slip-In Spindles,  8 Bolt Heavy-Duty Hubs, Four 340/60 R16.5
Wing Frame Tires Walking Beams With Spherical Pivot Bearings, Slip-in Spindles, 6 Bolt Heavy-Duty Hubs, Two 280/70 R15  Per Wing
Wing Fold Cylinders Two 4" x 40" Adjustable Constant-Flow Hydraulic Down Pressure
Lift Cylinders Center: (2) 4" x 10"; Wings: (2) 3-3/4" x 10"
Star Wheel™ Treader Gang 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings
24/7® Conditioning Reel Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings
Rear Hitch None
OPTIONAL EQUIPMENT  
Tongue Type Not Applicable
Excalibur® Blades Excalibur® Blades - 22" Diameter, 5 mm, 32 Flute, Reversed Crimped Center
Gang Angle Adjustment Hydraulic Adjustment 1 to 5 Degrees
Gauge Wheels Not Applicable
Gauge Wheels Not Applicable
Star Wheel™ Treaders Spring Cushion Gangs, Mechanical Adjustable
24/7® Conditioning Reel None
24/7® Conditioning Reel Flat Spiral HD Reels, No Daily Grease Maintenance Bearings
Rear Hitch Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITH ATTACHMENT
Rear Hitch Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT
OPERATING INFORMATION  
Recommended Speed of Operation 8-10 mph / 12-16 km/h (Rocky Conditions: 6-8 mph / 9-13 km/h)
Maximum Working Depth 3.5" / 8.9 cm
Recommended Tractor Power Range (mph/kw/h) 8-10 PTO Horsepower per Foot

» In Season Breakdown Service