> CR
Twin Rotor® Combines
Learn More
The combine for
the nonconformist
Sometimes you need to break with tradition to get
ahead. The new CR Twin Rotor combine from New
Holland stands out from the rest—both in looks and
performance. The dramatic exterior of the CR combine
is just a hint of the dramatic performance features
inside that help you extract every bit of grain from
every single acre you farm.
Model CR940 Combine
Model CR960 Combine
Model CR970 Combine
> CX Super Conventional Combines
Learn More
Unmatched
harvesting capacity and operator comfort
Trade up to a New Holland CX Super Conventional
combine and you benefit not only from the bold, new
styling, but also from a whole new level of
performance, convenience and comfort. When it comes
to harvesting capacity, nothing else comes close. CX
combines put more grain in the grain tank—especially
when harvesting on slopes of up to 14%.
CX combines offer extra-large grain tanks with
unloading rates of three bushels per second to speed
you through your harvest. The CX cab is also a
standout. Its flowing style, roomy dimensions and
efficient design put you in complete control.
CX840 Combine Standard Small Grain
CX840 Combine Deluxe Small Grain
CX840 Combine Corn and Soybean
CX840 Combine Grass Seed
CX860 Combine Small Grain
CX860 Combine Corn and Soybean
CX880 Combine Small Grain
> Corn Header for CR and CX Combines
Learn More
98C Corn Header
The 98C corn header is smooth, fast and durable. It
gets under downed corn, picks it up better than the
competition and takes in less trash for more combine
capacity. Available for 6 row, 8 row and 12 row
applications.
> Cutterbar Headers for CR and CX Combines
Learn More
72C Rigid
Cutterbar Header
The 72C rigid cutterbar header is available in 20-,
25- and 30-foot widths. The smallest model is
equipped with a single-knife drive, while the two
larger models feature twin-knife drives.
74C Flexible Cutterbar Header
The 74C flexible cutterbar header is available in
three cutting widths, and each is equipped with a
twin-knife drive. The 74C gives you a choice of 1
1/2-inch knives and guards (twin cut) or 3-inch
knives and guards. It also provides up to 4 1/2
inches of float and closely follows the ground
contour to pick up low-growing crops. And, with the
74C, the New Holland Terrain Tracer™ header
flotation system is standard equipment.
>
Draper Headers for CR and CX Combines
Learn More
92C Rice Belt
Header
The 92C rice belt header is 25 feet wide and
features your choice of single or double knife
drive. The 92C is a two-deck, center-mounted header
that features a single-feed belt, a large-diameter
full-floating auger, and extra-long retractable
fingers.
94C Grain Belt Header
The 94C grain belt header is available in 25-, 30-,
36-, 39- and 42-foot widths. Deck shift options on
the 30-, 36-, 39- and 42-foot models let you quickly
convert from combining to swathing. A self-contained
hydraulic system supplies smooth, reliable power to
both the draper belts and the knife drive without
the use of V-belts, pulleys and chains.
>
Flex Draper Header for CR and CX Combines
Learn More
84C Flex Draper
Header
The 84C flex draper headers is available in 30- and
36-foot widths and is ideal for in-ground
harvesting. Draper design provides smooth, even
"head first" feeding in the toughest conditions and
increases combine capacity up to 20%. A suspended
floating head with flexing wing sections provides
7.5 inches of free vertical and 4.8 degrees of free
lateral flotation. The 84C can easily be locked for
rigid off-ground direct cutting.
>
Windrow Pick-up Header for CR and CX Combines
Learn More
76C Windrow
Pick-up Header
The 76C windrow pick-up header is available in 12,
14 and 16-foot widths and two designs: SwathMaster™
Belt Pick-up and Rake-Up™ Pick-up.
SwathMaster™ Belt Pick-up
SwathMaster™ Belt Pick-up uses four individual
rollers, a pickup belt that gently lifts crop into
the header and a draper belt that carries the crop
to the auger and into the feeding area. Choose a
model with both front and rear windguard and
hydraulic adjustment on the front windguard, or
choose a model with a rear windguard with mechanical
adjustment.
> FX™ Self-Propelled Forage Harvesters
Learn More
FX
self-propelled forage harvesters put you in control
of greater productivity.
As a custom harvester or large dairy operator,
you’ll appreciate the productivity-boosting
performance of the new FX self-propelled forage
harvesters from New Holland. The new FX30, FX40, and
FX60 forage harvesters are built to help you work
faster—in all crop conditions—with added
convenience.
Here’s how we made the new FX harvesters even
better:
FX feedroll drive is now hydrostatic to provide a
wide range of cut lengths.
Feedroll drive is speed-synchronized between the
header auger and feedrolls for optimum crop feeding.
Sharp metal side sheets on the top feedroll cut
through trash, which is quickly evacuated by
impellers on the feedroll shafts.
Feedroll module features gear-box driven top rolls,
not chains.
Four-paddle blower moves crop efficiently—without
pinching or binding, common in accelerator-equipped
competitive models.
Fuel tank capacity is 240 gallons—15% larger than on
previous FX models.
FX30 and FX40 feature New Holland six-cylinder
diesels.
FX60 is powered by a Caterpillar six-cylinder
diesel.
Torque back-up for all FX models is an impressive
25% (from 2100 to 1800 rpm).
Hydrostatic ground drive provides the precise
control, flexibility and maneuverability needed for
harvesting operations.
Maximum ground speed at 23 mph is faster than
competitive models, thanks to infinitely variable
speed from 0 to 15 mph.
A wide selection of top-capacity windrow pickup
heads, corn headers and row-independent headers can
be attached to FX self-propelled forage harvesters.
> Pull-Type Forage Harvesters
Learn More
When it comes to
rugged, high-capacity forage harvesters, no one
builds them like New Holland. That's why New Holland
continues to offer America's best-selling forage
line.
Model 790 is designed for use with a maximum tractor
PTO hp of 150. 540- or 1,000-rpm drivelines are
available. Model FP230 is designed for use with a
maximum tractor PTO hp of 225 and has a 1,000 rpm
driveline. High-capacity model FP240 is designed for
use with a maximum tractor PTO hp of 300 and has a
1,000-rpm driveline. Larger throat size and wider
cutterhead allow top capacity.
> Forage Blowers
Learn More
Center-fill
silos over 100 feet tall
The high-capacity F62B forage blower is engineered
to quickly center-fill tall silos and make it easy
to keep pace with harvesters and wagons. An improved
design means vibration and noise are reduced and
makes filling your silos less of a chore. And, the
F62B is easy to transport and set up.
> Crop-Chopper®
Learn More
Chops a variety
of crops Dampness and morning dew won't slow down
chopping when you own a multi-purpose New Holland 38
Crop-Chopper®. It's perfect for chopping standing
grass crops for daily green feeding. It's also great
for making bedding from cornstalks or straw, or
shredding and spreading cornstalks for mulch. And,
it mows weeds, clears small brush and stubble, and
tops potatoes and beets. It even clips pastures and
waterways, chops flax and cleans up rice stubble.